54
Universal Wireless Device System
VectorBRIDGE
VectorBRIDGE allows the following wireless device add-ons.
Infrared Pet-Immune Sensor for indoor use (powered by 4 AAA Alkaline bat-
teries).
Infrared Pet-Immune Sensor for indoor use (powered by 1 Lithium battery).
Magnetic Door/Window Contact with 1 on-board contact (powered by 1 Lithium
battery).
Wireless Key for system arming/disarming (powered by 1 CR2032 battery).
Wireless Smoke Sensor for fire control (powered by 6 AA Alkaline batteries).
+
Use Long Life Alkaline batteries only to power the AMD10A and ASD10 Sen-
sors. Do not use other types of batteries, as this may affect system operation.
BPI Interfacing
VectorBRIDGE has a Customized Interfacing terminal board (BPI) for Bentel’s
Omnia, Omnia840 and Academy40 control panels. The BPI bus will simulate
Input expander zones, as shown in Table 1.
+
If the
Auxiliary Signals on BPI
option is enabled, VectorBRIDGE will simulate
the Input expander Zones shown in brackets in the BPI INTERFACING column
in Table 1.
Universal Interfacing
VectorBRIDGE has a Universal Interfacing terminal board with 16 Outputs and
2 Inputs (see below) compatible with all types of conventional control panels.
Ø
8 outputs for alarm signals from sensors: support up to 31 sensors (more than
one sensor can be assigned to each output)
Ø
1 Output to signal
Tamper
on Sensors, Receiver and Interface
Ø
1 Output to signal Sensors
Missing
(Supervisory)
Ø
1 Output to signal
Low Battery
on Sensors
Ø
1 Output to signal
Jamming
Ø
1 Output to signal
Arming by Wireless Key
Ø
1 Output to signal
Disarming by Wireless Key
Ø
1 Output to signal
Partition Arming by Wireless Key
Ø
1 Output to signal
Panic by Wireless Key
AMD10
AMD10A
AMC10
ARC10
ASD10
Summary of Contents for VectorBRIDGE
Page 95: ......