Bend-Tech Dragon A250 Series, Assembly Manual

Page: 33 / 44

33
Bend-Tech Dragon A250
Assembly Manual
Cables and Control Box
06
06
Cables and Control Box
6.1 Cable Pre-Installation
The Dragon A250 is delivered with the Cable Track rolled up and shrink wrapped at the front of
the machine, just behind the Trolley. The cables are pre-connected to the various components
on the Head of the Dragon A250.
The Installer will be required to unroll the Cable Track on the Cable Track Tray and route the
ends of the cables to the Control Box.
6.2 Installing the Cable Track
Remove the shrink wrap and unroll the Cable Track into the Cable Track Tray.
Route the cable ends through the large grommet in the Cable Track Tray.
Once the cables are routed through the hole in the cable track tray, click the end of the Cable
Track into the Cable Track Guide mounted on the Cable Track Tray.
Tools Needed
• Utility Knife
•
3/16 in. Allen Wrench
Hardware Needed
• Hardware Bag No. 4