Bend-Tech Dragon A250 Series, Assembly Manual

Page: 34 / 44

34 Bend-Tech Dragon A250 Assembly Manual
Cables and Control Box
06
6.3 Routing Cables
With the cables fed through the
hole in the cable track tray, place
the three 1 ½ in. cable loops from
Fastener Bag No. 4 around the
cables at even intervals between
the hole and the area just above the
control box.
Secure the cable loops along the
center of the Rail Beam using the
T-Nuts and screws in Fastener Bag
No. 4. Tighten securely to the side
of the Rail Beam.
6.4 Connect to Control Box
With the cables routed along the Rail Beam, insert the cables in their appropriate connections
at the Control Box. Both the cables and the Control Box will be clearly labeled. Tighten
securely by hand.
Cable Track Tray
Hole for Cables
Cable Track