Bend-Tech Dragon A250 Series Assembly Manual Download Page 12 | Manualshive

Page: 12 / 44

background image

12

Bend-Tech Dragon A250

Assembly Manual

Safety

01

1.2.1 Safety Equipment

Bend-Tech recommends using the proper safety equipment when installing the Dragon A250.

Safety equipment standards for each shop should be outlined in Occupational Safety and

Health Administration (OSHA) standards. Also, individual shops may have their own standards.

Always consult safety regulations before beginning work. Basic safety equipment may include:

! Warning !

Altering the installation methods and procedures outlined in this manual could result

in improper installation, machine damage, or personal injury.

Safety Precautions

•

Do not attempt to assemble the Dragon without reading this manual first.

•  Have the correct tools listed in the Tool List on hand.
•  Enlist help of 1-3 additional personnel trained to install industrial machinery.
•  Follow the methods and procedures outlined in this manual.
•  Do not attempt to lift heavy materials without assistance.
•  Before beginning, ensure the workspace is clean and of appropriate size for

Dragon A250 assembly.

Safety Glasses

Safety Shoes

Work Gloves

Hearing Protection

«
...
10
11
12
13
14
...
»

Summary of Contents for Dragon A250 Series













































Reviews:

No comments

Related manuals for Dragon A250 Series

Brand: 3M Pages: 8

Brand: Samsung Pages: 1

Tetrix 230 AC/DC Comfort 8P TM

Brand: EWM Pages: 82

Brand: Pure Acoustics Pages: 1

Brand: MRC Pages: 2

RAZOR CUT 40 AIR

Brand: Unimig Pages: 28

Brand: Uniden Pages: 16

Brand: X-10 Pages: 18

MultiPRO Series

Brand: Paton Pages: 44

Brand: Magmaweld Pages: 136

Brand: JLG Pages: 97

Brand: Krownlab Pages: 18

Brand: SALUPO Pages: 12

AlertMaxx DMS-269

Brand: Delta Pages: 16

Radiolink GSM-A2

Brand: Hellmertz Pages: 4

Brand: blupura Pages: 28

Brand: Pro Audio Pages: 2

Brand: Electro-Voice Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands