Bend-Tech Dragon A250 Series, Assembly Manual

Page: 18 / 44

18 Bend-Tech Dragon A250 Assembly Manual
Assembling the Dragon
03
3.4 Unpacking the Crate
When unpacking the crate, take care to keep
components of the machine organized so they can be
located easily. Remove all of the boxes and machine
components from the crate except for the head of the
machine. This will need to be removed last using a
forklift. Use a ½ in. socket and ratchet to remove the
major components of the machine. Tin snips will be
required to remove the beams.Two of the racks are
secured to the floor of the crate with screws. The third is
secured to the right side (sensor side) of the tail of the
machine, use a 3/16 in. Allen wrench to remove this rack;
only loosen the rack enough to slide it out. Take care not to damage the racks when moving
them.
3.5 Moving the Head into Position
The head of the machine is extremely heavy. As shipped, the head of the machines contains
all the working mechanics of the machine as well as the control box. Great care should
be taken not to damage any components on the head of the machine during moving and
installation.
3.5.1 Place the Head using a Forklift
Use a ½ in. socket and ratchet to remove the lag bolts securing the head of the machine to the
floor of the crate.
Tools Needed
• ½ in. socket and ratchet
• Tin Snips
•
3/16 Allen Wrench
• Forklift
• Wood Blocks
! Danger !
The Head of the machine is heavy. If the Head falls or tips over it could cause
severe injury or death.
Remember
Remove all other contents of the crate before attempting to move the head
of the machine.