Bend-Tech Dragon A250 Series, Assembly Manual

Page: 21 / 44

21
Bend-Tech Dragon A250
Assembly Manual
Assembling the Dragon
03
3.6.2 Slide Support Leg #4 into Position
Locate support leg #4 and slide it into position at the end of the first beam which is labeled
4. Ensure the swivel levelers are installed onto support leg #4 before proceeding with the
assembly.
3.6.3 Install the Second Beam
Locate the second beam, which will be labeled 4 at one end and 5 at the other end. Again, use
the stainless steel locating pins on the beam to align the beam when installing it.
Install the second beam so that the end labeled 4 is attached to the first beam and support leg
4. If necessary, use a rubber mallet or dead blow plastic hammer to seat the beam sections
together.
Important
Do not assemble the Dragon machine alone. Get help for moving and supporting
the machine components during assembly.
4 3
4 5