Bend-Tech Dragon A250 Series, Assembly Manual

Page: 41 / 44

41
Bend-Tech Dragon A250
Assembly Manual
Torch
08
8.2 Install the Torch Wand
The Torch is mounted to the Toolhead
using two mounting collars. For initial
install, the Torch should only be
mounted in the top collar.
Loosen the adjustment screws in
the top collar using a 3/16 in. Allen
wrench. Slide the Torch into the collar
from above, with the tip of the Torch
pointing down.
When the ceramic body of the Torch
is nearly touching the bottom collar,
hold the Torch in place and tighten the
top collar securely by hand. Do not
install the Torch in the bottom collar at
this time.
Only secure the Torch
in the top collar.
Important
Running the Torch Mount utility is required before the Dragon Machine is ready
for operation. This utility is used to set the torch operating height. The Torch
Mount procedure is outlined in the Startup and Training Manual Part 3.