Bend-Tech Dragon A250 Series, Assembly Manual

Page: 16 / 44

16 Bend-Tech Dragon A250 Assembly Manual
Assembling the Dragon
03
Disassemble the crate first. Use a cordless driver and T25 bit to remove the screws that fasten
the top of the crate to the sides of the crate. Lift the top off and set it aside. Remove the screws
fastening one of the two larger crate sides, then remove the two smaller crate ends. Remove
the remaining crate side.
3.3 Getting Started
Uncrating the Dragon A250 components properly, and keeping them in order, is critical to
achieving the quickest, most seamless installation possible. As shipped, the components of
the machine will be bolted to the floor of the crate, strapped to the floor of the crate, strapped
together, or shrink-wrapped together.
3.3.1 Component Boxes
Remove the various component boxes packed around the Dragon A250 machine. The
Component Boxes are labeled for reference during the assembly process.
! Caution !
Enlist the help of additional personnel when uncrating and assembling the machine.
A dropped crate component could cause injury to bystanders or could damage the
machine. Crate sides are large and heavy and should not be lifted without help.
Do not remove any strapping or shrink wrap from the head of the Dragon A250. It is
important to keep components secure while the Head is being removed from the crate.