BELGACOM Forum Phone 525 User Manual Download Page 66

Page: 66 / 164

Making External/Internal Calls

Telephoning

Making an Internal Call

With Automatic Line Seizure

With Manual Line Seizure

Using Destination Keys to Make Calls

Lift the handset (your call key is seized).

and/or

Press the particular call key (hands-free mode).

and/or

Press the headset key (headset operation
requires that the headset is switched on, see
page 124).

* *

Press the star key twice.

Dial the internal call number.

Lift the handset (your call key is seized).

and/or

Press the particular call key (hands-free mode).

and/or

Press the headset key (headset operation
requires that the headset is switched on, see
page 124).

Dial the internal call number.

You can save call numbers to programmable
keys. To dial, simply press the destination key.

Then you pick up the handset or press the
desired call key, hands-free/open-listening key
or headset key. Your call key is seized.

Summary of Contents for Forum Phone 525





































































































































































Search results

Summary of Contents for Forum Phone 525

Reviews:

Related manuals for Forum Phone 525

Brands by name

Popular brands

BELGACOM Forum Phone 525, User Manual

Search results

Summary of Contents for Forum Phone 525

Reviews:

Related manuals for Forum Phone 525

Brands by name

Popular brands