Programming Keys
146
Features and MenuCards
Programming Multiple Functions and/or Call Numbers on
a Key
Using a Feature Key (Stack / Link)
The LED of a key programmed as a stack has no function. You can
use a key programmed as a
Stack
as follows:
z
Short key press
: The programmed entries are displayed in a
selection menu. Select the desired entry and press the OK
key
O
. The programmed call number will be dialled or the
programmed function executed.
g
Long
press the programmable key, then …
P O
select
Stack
or
Link features
and press the
OK key.
Z O
Select
Text:
to label the key. If you do not enter
a text, the key will be labelled with the default
text (either “Stack” or “Link”). Press the OK key.
P O
Select
Add
and make a selection from the Menu-
Card shown …
z
Features
to programme a feature key (see
Programming Functions (Features)
starting
on page 142),
z
Dest.
to programme a destination key (see
Programming Call Numbers (Destinations)
starting on page 140); only possible when
programming a stack.
Then press the OK key.
The MenuCard “Stack” or “Link” is shown with
the new entry in the list. You can now add
another entry. When all memory locations are
occupied you will hear a negative acknowledge-
ment tone.
O
To end programming, select the
Save
menu
item. Then press the OK key. The programming
is saved.
Summary of Contents for Forum Phone 525
Page 1: ...Belgacom Forum 500 and Forum 5000 Forum Phone 515 Forum Phone 525 Forum Phone 535 User Guide...
Page 8: ...6...
Page 163: ......
