BELGACOM Forum Phone 525, User Manual

Page: 108 / 164

Programming the Call Keys 106
Team Functions
MenuCard “Prog. team key”
g
Long press the team key, then select …
1 Modify text
: The text currently assigned to the key is shown
on the display of your telephone. To change the text, press
O
. Delete the existing text with the
C
key and enter new
text, if required. Press
O
and confirm this with
Save
. If you
delete the text, only the key’s call number will be displayed.
2 Call signalling
: Specify whether call signalling to this key is
to be
Opticalƒ&ƒacoustic
,
Optical only
or
Acoustic after
delay
. If you select
Acoustic after delay
, specify the number
of seconds after which your telephone is to ring.
3 Call protect
: Switch call protection
On
or
Off
for all calls, for
internal calls only, or for external calls only. If call protection has
been activated, this team key will only indicate calls by means of a
visual signal, even if they are made from a direct-call key.
4 Ring tone
: You can set the
Volume
and
Melody
for different
types of incoming calls (
1ƒExternal calls
,
2ƒInternal calls
,
3ƒVIP call
,
4ƒDoor call
) for each team key. Proceed as
described in the section “2 Ring Tone” on page 123.
5ƒCall wait. prot.
: While you are making a call, other calls for
the call number of this team key are not signalled by a call waiting
tone (but at the team keys of other terminals unless call waiting
protection was programmed there). Use the
On
/
Off
options to
switch the call waiting protection function on or off.
6ƒLists
: Define if for the call number of this team key the caller
lists (missed calls and accepted calls) and the redial list are
recorded. Use
On
/
Off
to activate/deactivate the lists for this team
key.
Direct-call Key
When a direct-call key is long pressed, no MenuCard is displayed.
A direct-call key is configured exclusively via the
Configurator of
the Forum 500 / Forum 5000 Web console.