1523.5-0000010 OM
85
ATTENTION: AFTER BOLT TIGHTENING MAKE SURE THE BUTT ENDS OF UPPER
AND LOWER BUSHINGS OVERHAND ONE IN RELATION TO THE OTHER FOR NOT
MORE THAN 1...2 MM!
DIAGRAM 1 DIAGRAM 2
Figure 3.2.5
– Rear wheel track setting
Figure 3.4 – Rear wheel track setting
Tire standard
size
Diagram No.
(figure 3.2.5)
Track dimension
«
К
», mm
The setting size from
the butt end of the
bushing hub group to
the semiaxle butt end
«L», mm
520/70R38
1
1600…1916
160…0
2
1946…2445
250…0
ATTENTION: WHEN SHIPPED FROM THE WORKS, REAR WHEELS ARE MOUNTED
ONTO THE WHEEL TRACK ACCORDING TO DIAGRAM 1 (FIGURE 3.2.5)!
Note – To get information on the rules of rear wheel track setting on tires 18.4R38 (alterna-
tive configuration), address your dealer!
3.2.10 Rear wheel twinning
With an aim to improve gripping properties of the tractor when coupled with heavy agricul-
tural implements on soil with low bearing capacity, rear wheel twinning with use of spacers
is provided.
To get information on the rules of rear wheel twinning and operating restrictions for
the tractors with rear wheels twinned, contact your dealer!
