1523.5-0000010 OM
141
Table 5.2 finished
Opera-
tion No
Operation description
Periodicity, h
8-10 125 250 500 100
0
200
0
64
6)
Change oil in the FPTO reduction unit
X
65
Change brake liquid in the clutch control drive
X
66
Change brake liquid in the brake control drive
X
67
6)
Lubricate the sleeves of FLL lever pin
X
68
Change grease in steering joints and rinse the
steering joints elements
X
69
Check / adjust the pneumatic system pressure
regulator
X
70
Check / tighten tension bolts of cylinder heads
X
71
change the main filter cartridge of the air cleaner
X
72
Check / tighten tractor external threaded joints
X
73
Rinse the engine cooling system and replace the
cooling liquid in the engine cooling system
X
74
Rinse the engine breathers
X
75
Change filter cartridge of the cab ventilation and
heating systems
X
76
Change filter cartridge of the fine fuel filter
Every 600 hours of operation or
once a year
77
Change filter cartridge of the coarse fuel filter
Every 600 hours of operation or
once a year
78
1)
Change the filter-drier of the air-conditioning sys-
tem
Every 800 hours of operation or
once a year
79
Carry out complex maintenance service of system
“COMMON RAIL”
Every 3000 hours of operation
or once a year
80
Adjust the valve adjusting operating pressure in
the hydraulic system of transmission, located the
gearbox centrifuge
Depending on oil pressure de-
viance in the transmission hy-
draulic system
81
Carry out maintenance service of the engine air
cleaner
Depending on dirtiness
________________________________________________________________________
__________________
1)
The operation is performed when the tractor is equipped with an air conditioner instead of a
fan-heater.
2)
The operation is performed when the tractor RLL is equipped with lower links with gripper
tools.
3)
The operation shall be carried out once during the first maintenance service on a shift basis
(in every 8-10 hours of operation), carried out by the customer, and then every 125 hours of
tractor operation.
4)
Control and if necessary, bringing tire internal pressure to the norm shall be carried out each
time when one mode of the tractor operation is changed to another operation mode, and when
the implements and tools coupled with the tractor are changed.
5)
AB check and maintenance shall be carried out once every 3 months and not less.
6)
The operation is performed when the tractor is equipped with FPTO and FLL against order.
7)
The first and second change shall be carried out in 500 hours of tractor operation. Then the
change shall be carried out every 1000 hours of operation at the same time with oil change.
