1523.5-0000010 OM
143
5.4.1.4 Operation 3. Check of oil level in the HLL tank
Before checking oil level, set the tractor on the flat horizontal ground. Lower RLL links to
the extreme lower position. Stop the engine and engage the parking brakes.
HLL tank is located on the left side of the clutch coupling housing.
Check the oil level visually according to oil level indicator 2 (figure 5.4.3) on the tank. The
level shall be between the marks “O” and “
П
” of the oil level indicator. If necessary, refill
the oil up to the “
П
” mark through an oil filler hole, for which turn off plug 1.
While operating the tractor coupled with implements requiring higher oil consumption, fill
the oil up to the mark “C” on the oil level indicator with the hydraulic cylinder retracted rods
of the implement coupled with the tractor.
.
1 – oil filler hole plug; 2 – oil level indicator; 3 – HLL tank.
Figure 5.4.3 – Check of oil level in the HLL tank
ATTENTION: OIL LEVEL CHECKING OPERATION IN THE HYDRAULIC LIFT
LINKAGE TANK SHALL BE CARRIED OUT ONLY WITH THE RETRACTED RODS OF
RLL HYDRAULIC CYLINDERS AS WELL AS OF THE IMPLEMENTS COUPLED WITH
THE TRACTOR!
5.4.1.5 Operation 4. Check of oil level in the HSC tank
Before checking the oil level in the HSC tank (figure 5.4.4), it is required to set the tractor
on flat horizontal ground. Stop the engine and engage the parking brakes.
The HSC oil tank is located on the right side of the clutch coupling housing.
Check the oil level visually according to oil level indicator 1 on HSC tank 2. The level shall
be between the marks “C” and “
П
” of the oil level indicator. If necessary, refill oil up to the
required level for which unscrew plug 4 together with valve 3 and refill oil up to the mark
“C”.
1 – oil level indicator; 2 – HSC tank; 3 – valve; 4 – plug.
Figure 5.4.4 – Check of oil level in HSC tank
