BECKWITH ELECTRIC Syncrocloser M-3410A, Instruction Book

Page: 25 / 225

PRODUCT CAUTIONS
Before attempting any test, calibration, or maintenance procedure, personnel must be completely familiar
with the particular circuitry of this unit, and have an adequate understanding of field effect devices. If a
component is found to be defective, always follow replacement procedures carefully to that assure safety
features are maintained. Always replace components with those of equal or better quality as shown in the
Parts List of the Instruction Book.
A A A A Avvvvvoid s oid s oid s oid s oid stttttatic c atic c atic c atic c atic char har har har harg gg ggeeeee
This unit contains MOS circuitry, which can be damaged by improper test or rework procedures. Care
should be taken to avoid static charge on work surfaces and service personnel.
Use caution when measuring resistances Use caution when measuring resistances
Use caution when measuring resistances Use caution when measuring resistances Use caution when measuring resistances
Any attempt to measure resistances between points on the printed circuit board, unless otherwise noted
in the Instruction Book, is likely to cause damage to the unit.