BECKWITH ELECTRIC Syncrocloser M-3410A, Instruction Book

Page: 112 / 225

Configuration and Settings – 3
3–41
Pickup: 120.0
Delay: 10
Outputs:
!
2
)
1
Blocking Inputs:
!
2
!
1
!
FL
(100.0 to 150.0 %)
(1 to 8160 cycles)
Peak Voltage 59I
#1
Enable Disable
Figure 3-46 M-3811A IPScom
®
for Palm
OS
®
(59I) Peak Overvoltage Setup Voltage
Dialog Screen
■
NOTE : Pickup percentage is based on Nominal
Voltage. Pickup to be entered as a
nominal peak percentage value.
COMMANDS: PEAK VOLTAGE 59I/ACTION/...
Send This command sends the individual
setpoint/setting contained in the
handheld edit buffer to the relay. The
difference between the Send command
and the Download command is that the
Download command sends (overwrites)
the entire data record file that exists on
the relay.
Receive This command reads the individual
setpoint/setting from the relay into the
handheld edit buffer. The difference
between the Receive command and the
Upload command is that the Upload
command receives (overwrites) the
entire data record file that exists on the
handheld unit.
Save This command saves the individual
setpoint/setting from the handheld edit
buffer to the handheld data record. A
successful Save operation will result in
a Save confirmation.
Retrieve This command loads the setpoint/setting
values that correspond to the displayed
edit screen from the handheld data
record into the handheld edit buffer.
Load Default The Load Default command loads the
default setpoint/setting values into the
handheld edit buffer, and displays on
the current screen.
Done This command returns the user to the
handheld Main screen.