M‑3311A Instruction Book
6–38
51G Inverse Time Ground Overcurrent
VOLTAGE INPUTS:
None
CURRENT INPUTS:
Configuration C5
TEST SETTINGS:
51GW2/W3/W4 Pickup
P
Amps
(0.50 to 12.00)
1 Amp CT Rating
(0.1 to 2.4)
Standard Inverse Time Curves:
1
Curve
C
(1 to 4)
Time Dial
TD
(0.5 to 11.0)
IEC Inverse Time Curves:
1
IEC Curve
C
(5 to 8)
IEC Time Dial
TD
(0.05 to 1.10)
IEEE Inverse Time Curves:
1
IEEE Curve
C
(9 to 11)
IEEE Time Dial
(0.5 to 15.0)
Programmed Outputs
Z
OUT
(1 to 8)
Expanded I/O
(9 to 16)
Function 50G
Disable
Function 87GD
Disable
1. Disable functions as shown. Refer to Section 4.4,
System Setpoints
, for procedures.
2. Confirm settings to be tested. Only the winding being tested should be enabled; the others should
be disabled.
3. Connect current inputs in Configuration C5 as designated previously. See Section 6.4,
Input
Configurations
, for configurations.
4.
Refer to Appendix D. Calculate test times for levels represented on the graphs. It is suggested
that 4 or 5 test levels be chosen.
t = time in seconds TD = Time Dial setting M = current in multiples of pickup
5.
Time Test
: With output contacts connected to the timer, apply currents used in calculations from
Step 4 and start timing while observing selected winding target
LED for pickup. The operating
time will be (
D
) cycles within
3 cycles or
3% of calculated time.
6.
Repeat Step 5 for each test level chosen.
7.
Repeat Steps 4, 5 & 6 using Currents
I
GW3
,
I
GW4
while observing the selected winding target LED
for pickup.
8. If testing is complete, enable any functions disabled for this test. If further testing is desired, check
the proper functions to disable for the next test and continue from this configuration.
1
Either a Standard Curve, IEC Curve or IEEE Curve must be selected.
Summary of Contents for M?3311A
