Beckhoff AMP8000, Operating Instructions Manual

Page: 60 / 109

Transport and storage
60
───
Version: 1.1 AMP8000 and AMP8500
6.1
Conditions
Care must be taken that the distributed servo drive system and indi-
vidual components are not damaged during transport and storage.
Observe the specifications in the following chapters and comply with
the following conditions:
• Avoid electrostatic charging
• Avoid contact with highly insulating materials
• Temperature: -25 °C to +55 °C, maximum fluctuation 20 K per
hour
• Air humidity: relative humidity max. 95 %, non-condensing
• Use of suitable means of transport
• Use of the vendor's original packaging
The table shows the maximum stacking height in which you may
store and transport the distributed servo drive system in its original
packaging on a pallet:
AMP component Stacking height [pieces]
AMP8620 8
AMP8805 8
AMP883x 8
AMP803x-xxxx 14 per layer; 7 layers per pallet
AMP804x-xxxx
AMP853x-xxxx
AMP8531-xxx1
AMP8541-xxx0
AMP8033-xxx1 9 per layer; 6 layers per pallet
AMP804x-xxx1
AMP805x-xxxx
AMP8533-xxx0
AMP853x-xxx1
AMP854x-xxx0
AMP854x-xxx1
AMP8054-xxx1 4 per layer; 4 layers per pallet
AMP8553-xxx1