Beckhoff AMP8000, Operating Instructions Manual

Page: 40 / 109

Technical data
40
───
Version: 1.1 AMP8000 and AMP8500
4.2
Data for operation and en-
vironment
Only operate the AMP8000 distributed servo drive system un-
der specified conditions
Operate the AMP8000 distributed servo drive system only in accor-
dance with the specifications for operation and the environment
listed in this chapter. This ensures a long service life and proper
operation.
Temperatures above 40 °C and encapsulated installation can
shorten the service life of the AMP8000 distributed servo drive sys-
tem.
Beckhoff products are designed for operation under certain environ-
mental conditions, which vary according to the product. The follow-
ing specifications must be observed for operation and environment
in order to achieve the optimum service life of the products.
Environmental requirements
Ambient temperature during operation 0 °C to +40 °C
Ambient temperature during transport -25 °C to +70 °C, maximum fluctuation 20 K per hour
Ambient temperature during storage -25 °C to +55 °C, maximum fluctuation 20 K per hour
Power derating No power derating up to 1000 m above sea level
Power derating of 1 % / 100 m from 1000 m up to maximally
2000 m above sea level
Installation altitude max. 2000 m
Permissible humidity in operation 95 % relative humidity, no condensation
Permissible humidity during transport
and storage 15 % to 95 % relative humidity, no condensation
Corrosion protection Not required:
Special measures are to be taken in consultation with the vendor if
the environmental conditions are extreme or if they differ from
those described in this chapter.
Degree of pollution 2 for AX883x
3 for AMP8620, AMP8805 and AMP80xx
Specifications for intended use
Cooling Convection
Insulation material class F according to IEC 60085 and UL1446 class F
Protection rating Housing: IP65
Shaft feedthrough: IP54 / IP20 in mounting position V3
Shaft feedthrough with shaft sealing ring: IP65
Vibration resistance 1 G, 150 Hz according to EN 60068-2-6
Shock resistance 5 G, 30 ms according to EN 60068-2-27
EMC requirements conforms to EN 61800-3
Approvals CE
EAC
cURus
See chapter: Guidelines and Standards