Beckhoff AMP8000, Operating Instructions Manual

Page: 15 / 109

For your safety
Version: 1.1
───
15 AMP8000 and AMP8500
2.1.3
Distributed Servo Drive
2.1.3
Warning of a hot surface
During and after operation there is a risk of burns at the motor hous-
ing due to hot surfaces over 60 °C. Allow the motor housing to cool
for at least 15 minutes.
Avoid shocks to the shaft
Impacts on the shaft may cause the maximum permissible axial and
radial values to be exceeded. Optical encoder systems can thus be
destroyed.