Beckhoff AMP8000, Operating Instructions Manual

Page: 95 / 109

Maintenance and cleaning
Version: 1.1
───
95 AMP8000 and AMP8500
WARNING
Ensure safe condition for cleaning work
Basically, electronic devices are not fail-safe. The condition is al-
ways safe when the unit is switched off and not energized. For
cleaning work, bring the connected components and the machine
into a safe state.
Carrying cleaning work during operation can lead to serious or fa-
tal injuries.
Do not immerse or spray components
Only wipe the components of the distributed servo drive system
with cleaner and a cloth.
Cleaning by immersion into non-permissible solutions may cause
damage to the surfaces of the components.
Contamination, dust or chips can have a negative effect on the func-
tion of the components. In the worst case, contamination can lead to
failure. Therefore, clean and service the components at regular in-
tervals.
11.1
Cleaning agents
Clean the components carefully with a damp cloth or a brush.
Use grease-dissolving and non-aggressive cleaning agents such as
isopropanol for cleaning.
11.1.1
Not applicable
Cleaning agents Chemical formula
Aniline hydrochloride C
6
H
5
NH
2
HCI
Bromine Br
2
Sodium hypochlorite; bleaching
solution NaCIO
Mercury (II) chloride HgCl
2
Hydrochloric acid HCI