Safety instructions
The following safety instructions and warnings are intended to avert hazards and to prevent property damage and personal injury.
It is important to follow these instructions.
General information
•
In addition to the fire and accident prevention regulations, the safety instructions given in the current
standard version of EN 12453, EN 12978, VDE 0100, EN 50110, EN 60204, EN 50178, EN 60335 and
ASR A1.7 must be observed.
•
All work, including maintenance and cleaning, on electrical installations as well as other system parts
must always be performed by trained technicians, in particular qualified electricians.
•
The limits given in the technical data must not be exceeded.
•
The illustrations contained in these instructions are intended as an aid to understanding how the
product operates. Therefore, the illustrations may differ from the actual display on the product.
Caution
•
When electrical or electronic equipment and units are operated, certain components are
live. Physical injuries or damage to property can result in the event of unauthorised inter-
ventions or failure to heed warnings.
•
When moving the doors in dead-man mode it is necessary to ensure that the door region
is visible to the operator, since safety equipment such as the safety edge of the light bar-
rier is not effective in this operating mode.
•
Operating the control unit when the housing is open is not allowed.
Attention
•
Turning on or operating a control unit when dew is present on the unit is not allowed. It
can lead to the control unit being ruined.
Operating notes
•
Do not allow children to play with permanently mounted regulating or control devices.
•
Keep remote control units out of the reach of children.
•
Systems have to be checked regularly by authorised specialists for wear and damage.
•
It is forbidden to use a damaged controller.
•
To avoid damage to the operator controls, they should not be touched with sharp objects. Only use
your fingers to use the operator controls.
•
Do not operate equipment if people or objects are within the danger zone.
Caution
•
If the connecting cable of this unit is damaged, it must be replaced by the manufacturer
or their customer service department or a similarly qualified person in order to avoid
hazards.
Notes on electrical connection and assembly
•
All applicable standards and regulations for electrical installation must be complied with.
•
Disconnect the electrical supply from the equipment before installing and connecting accessories and
extras, and protect against unauthorised reconnection in accordance with the safety regulations.
4
