Baxi LUNA HT 1.280, Installation, Operation And Maintenance Manual

Page: 74 / 144

Function Prog.
no.
Level
1)
Standard value
State solid fuel boiler
State buffer storage tank
State swimming pool
Year
Date
Time
Telephone customer service
1) Eu = End user; C = Commissioning; E = Engineer
Note: Parameters with the program numbers 1- 54 are individual parameters of
the operating unit and the room unit and may, therefore, be set differently on
both devices. All paramteres from programme number 500 onwards are stored on
the controller and, therefore, identical. The value changed last is the valid value.
8.4 Explanations for setting
table
Time and date
Time of day and date
(1 -3)
The control has a year clock with setting possibilities for time, day/month and
year. Time and date must be correctly set, so that the heating programs can ope-
rate to previously carried out programming.
Summertime
(5 - 6)
The start of the summertime can be set under program number 5; the end of
summer time will be set under program number 6. The time changing will be car-
ried out on the Sunday following the set date.
Operator section
Language
(20)
The language of the menu guidance can be modified under programme number
20.
Info
(22)
Temporary :The information display returns to the basic display after 8 minutes.
Permanently :The information display remains permanently displayed after call-
up with the information button.
Contrast of display
(25)
Under prog. No. 25 the contrast of the display can be adjusted.
Operation lock
(26)
If this function is activated the following operating elements are locked:
- Operating mode buttons for heating and drinking water mode
- Control knob (comfort-setpoint room temperature)
- Presence button (only room device)
Programming lock
(27)
In case of switched on lock, the parameters can be displayed, but not changed.
- Temporary unlocking:
Press the OK- and the ESC-button simultaneously for at least 3 sec. The lock will
be re-activated after leaving the setting level.
- Permanent unlocking:
At first temporary unlocking, then prog. no. 27 to "Off".
Programming
74 358 436 08.10