Baxi LUNA HT 1.280, Installation, Operation And Maintenance Manual

Page: 47 / 144

8. Programming
8.1 Programming procedure
The selection of the setting levels and menu points for end users and heating spe-
cialists is carried out by means of the following diagram:
Fig. 11: Selection of setting levels and menu points
Basic display
Press
Press information button for approximately 3 s, until the display Enduser appears
Setting levels:
Enduser (Eu)
Commissioning (C)
incl. enduser (E)
Engineer (E)
incl. enduser (E) ans commissioning (C)
OEM
includes all other setting levels and is
protected by a password.
Menu points:
Time and date
Operator section
Radio
Time prog heating circuit 1
Time prog heating circuit 2
Time program 3 / HC3
Time program 4/DHW
Time program 5
Holidays heating circuit 1
Holidays heating circuit 2
Holidays heating circuit 3
Heating circuit 1
Heating circuit 2
Heating circuit 3
DHW
Consumer circuit 1
Consumer circuit 2
Swimming pool circuit
Primary contr/system pump
Boiler
Solid fuel boiler
Buffer storage tank
DHW storage tank
Instantaneous water heater
Configuration
...
Depending on the selection of setting level and
programming, not all menu points are visible!
Boiler temperature
Programming
358 436 08.10 47