Baxi LUNA HT 1.280, Installation, Operation And Maintenance Manual

Page: 50 / 144

8.3 Setting table
- Not all parameters displayed in the display are listed in the setting table.
- Depending on the plant configuration, not all parameters listed in the setting
table are displayed in the display.
- In order to get to the setting levels: Enduser (E), Commissioning (I) and Specialist
(F), press OK button; after this, press and hold the information (i) button for 3
seconds, select the required level with the handwheel and acknowledge with
the OK button.
Tab. 5: Setting the parameters
Function Prog.
no.
Level
1)
Standard value
Time of day and date
Hours/minutes 1 Eu 00:00 (h:min)
Day/month 2 Eu 01.01 (day. month)
Year 3 Eu 2004 (year)
Start of summertime 5 E 25.03 (day.month)
End of summertime 6 E 25.10 (day, month)
Operator section
This parameter is only visible in the room device!
Language 20 Eu English
Info
Temporarily | Permanently
22 E Temporarily
Display of errors
Code | Code and text
23 E Code and text
Contrast of display 25 Eu 87
Operation lock
Off | On
26 E Off
Programming lock
Off | On
27 E Off
Save basic settings
No | Yes
This parameter is only visible in the room device!
30 E No
Activate basic settings
No | Yes
31 E No
Used as
Room unit 1 | Room unit 2 | Room unit P | Operator unit | Service unit
This parameter is only visible in the room device!
40 C Room unit 1
Assignment device 1
Heating circuit 1 | Heating circuits 1and 2
This parameter is only visible in the room device, as the operating
unit in the boiler is fixed programmed for the operating device!
42 C Heating circuit 1
Operation HC2
Commonly with HC1 | Independently
44 C Commonly with HC1
Operation HC3
Commonly with HC1 | Independently
46 C Commonly with HC1
Programming
50 358 436 08.10