Baxi LUNA HT 1.280, Installation, Operation And Maintenance Manual

Page: 18 / 144

4.5 Notes for installation
location
Caution! Danger of damage from water!
The following has to be observed for the installation of the Power HT:
In order to prevent damage due to water, particularly due to leakages in the DHW
storage tank, suitable precautionary measures should be taken regarding installa-
tion.
The installation room must be dry and the room temperature must be between 0
and 32°C.
The installation location has to be selected, especially, with respect to ducting of
the exhaust gas ducts. When installing the boiler, the specified wall clearances ha-
ve to be maintained.
Along with the general rules of the technology, especially the regulations of the
states, such as fire and construction ordinances as well as heating room guideli-
nes, are to be observed. Sufficient space should exist in the front to carry out in-
spection and maintenance work.
Caution! Danger of damaging the device!
Aggressive foreign substances in the combustion supply air can destroy or damage
the heat generator. Therefore the installation in rooms with high humidity (see al-
so "Operation in wet rooms") or heavy dust accumulation is only allowed with
room air independent operating modes.
If the Power HT is operated in rooms in which solvents, chorine contai-
ning cleaning agents, paint, glues or similar substances are worked with or in
which such substances are stored, only room air independent operation is permis-
sible. This applies especially for rooms in which ammonia and its compounds are
heavily used, as well as nitrites and sulphides (animal breeding and recycling facili-
ties, battery and galvanising rooms, etc.).
For damages occurring due to the installation in an unsuitable location or based
on improper combustion air supply, there is no warranty claim.
Before installation
18 358 436 08.10