Baxi LUNA HT 1.280, Installation, Operation And Maintenance Manual

Page: 46 / 144

7.8 Servicing message
If the maintenance sign appears in the display, a maintenance message exists
or the heating system is in special operation.
- Press information button (i)
- further information can be called up (see section 9.13 Maintenance code- table ).
Note: The maintenance message has not been activated by the setting in the fac-
tory.
7.9 Emergency mode (Manual
control)
Activation of manual control. If the manual control function is activated the boiler
will be controlled to the Setpoint manual control. All pumps will be activated. Ad-
ditional request will be ignored!
1. Press OK button
2. Select menu point Maintenance/service
3. Press OK button
4. Select parameters Manual control (prog.-no. 7140)
5. Press OK button
6. Select parameter"On"
7. Press OK button
8. Leave programming level by pressing the operation mode button heating ope-
ration
7.10 Restore standard values
The standard values will be restored as described below:
- select level engineer and prog.no. 31
- Change to Yes and wait until value is switching back to No
- Leave menu by pressing ESC
You can find more information for adjusting parameters in the section programm-
ing .
Operation
46 358 436 08.10