Baxi LUNA HT 1.280, Installation, Operation And Maintenance Manual

Page: 54 / 144

Function Prog.
no.
Level
1)
Standard value
Continuous pump operation
No | Yes
809 E No
Overtemp prot pump circuit
Off | On
820 E ON
Mixing valve boost 830 E 5°C
Actuator running time 834 E 120 s
Floor curing function
Off | Functional heating | Curing heating | Functional/curing heating |
Curing/Functional heating | Manually
850 C Off
Floor curing setp manually 851 E 25°C
Floor curing setp current 855 E 0°C
Floor curing day current 856 E 0°C
Excess heat draw
Off | Heating mode | Always
861 E Always
With buffer storage tank
Off | Heating mode | Always
870 E Yes
With prim contr/system pump
No | Yes
872 E Yes
Pump speed reduction
Operating level | Characteristic
880 E Characteristic
Pump speed min 882 C 0 %
Pump speed max 883 C 100 %
Curve readj at 50% speed 888 E 33 %
Flow setp readj speed ctrl
No | Yes
890 E Yes
Operating level changeover
Frost protection | Reduced | Comfort
898 E Reduced
Optg mode changeover
None | Protection | Reduced | Comfort | Automatic
900 E Protection
Heating circuit 2
Parameter only visible, if heating circuit 2 exists!
Operating mode Heating circuit 2
Protection | Automatic | Reduced | Comfort
1000 Eu Automatic
Comfort setpoint 1010 Eu 20.0°C
Reduced setpoint 1012 Eu 16.0°C
Frost protection setpoint 1014 Eu 10.0°C
Heating curve slope 1020 Eu 1.50
Heating curve displacement 1021 E 0.0°C
Heating curve adaption
Off | On
1026 E Off
Summer/winter heating limit 1030 Eu 18°C
24-hour heating limit 1032 E -3°C
Flow temp setpoint min 1040 E 8°C
Flow temp setpoint max 1041 E 80°C
Flow temp setpoint room stat 1042 E 65°C
Programming
54 358 436 08.10