Barco XDL, Installation Manual

Page: 39 / 88

39 R5906150 /05 XDL
U
+75%
-60%
-35% +35%
D
L R
P
F
U
D
SIDE VIEW
P
F
+75%
-60%
TOP VIEW
P
F
L
R
-35%
+35%
Image 4 – 6 Vertical and horizontal shift range
P DMD
F Field of view
It is mechanical possible to shift outside the recommended field of view, but it will result in a decline
of image quality depending on the used lens and the zoom position of the used lens. Furthermore,
shifting too much in both directions will result in a blurred image corner.
Best image quality is projected in the On-Axis configuration.
Horizontal and vertical projector tilt ranges
Tilting vertically and horizontally has its limitations on the projector. These limitations ensure that the air dryers
in the projector work properly and safely. Mounting a projector outside of these
“ green zones ” may cause
condensate to appear in the projector and may cause damage to the electronic and/or the optical parts.
Side to side tilting of the projector may not exceed ±20°. Outside of this range, there is one exception (area C)
when the projector can be mounted at 90° sideways, under the condition that the Input and communication
unit is facing downward (portrait mode).
No other sidewards tilting is allowed.
In normal mode, the projector can also be rotated and mounted up and downwards in an angle that does not
exceed:
• ±45° upwards.
• ±30° downwards.
MAX
M
AX
20°
45°
30
20°
A
A
B B
C
-90°
Image 4 – 7
Installation preparations