Barco XDL, Installation Manual

Page: 56 / 88

R5906150 /05 XDL 56
3
1
2
Image 5 – 17
5.10 Connecting a UPS to the projector electronics
WARNING: Only use UPS units which are suitable for the XDL series projector. See chapter
“ Installation requirements ” for more information about the requirements of the UPS.
Required tools
No tools required.
How to connect the UPS
1. Install the UPS according to the instructions of the manufacturer and the local regulations.
2. Connect the power output cord from the UPS unit to the UPS inlet socket of the projector (right socket).
Image 5 – 18
3. Secure the UPS inlet socket with a fixation spring. Handle as follow:
• Squeeze the fixation spring together.
• Slide the fixation spring on the fixation pins while squeezing together and push it against the power
plug.
• Release the fixation spring.
4. Install on the power outlet the second fixation spring to prevent losing it.
Image 5 – 19
Installation procedures