Barco XDL, Installation Manual

Page: 51 / 88

51 R5906150 /05 XDL
2
Image 5 – 10
6. Loosen the retaining screw (reference 3 Image 5 – 11 ) of the inner front door (door with the Stop button).
Use a 3 mm Allen wrench.
7. Pivot the inner front door to have full access the mains compartment parts.
3
Image 5 – 11
5.6 Connecting the external safety interlocks
The terminal for the external safety interlocks is located inside the mains compartment. This
procedure assumes that the cover of the mains compartment is already removed. See chapter
“ Accessing the mains compartment ” , page 50 .
Required tools
Flat screwdriver (small)
How to connect the external safety interlocks with the projector?
1. Remove the 10 pole terminal block from its socket (reference 3 Image 5 – 12 ). Use a small screw driver.
2. Guide the cable(s) coming from the external interlock device(s) through the cable gland(s) located at the
base of the mains compartment (reference 4
Image 5 – 12 ).
3. Remove the shunt wire(s) from the 10 pole terminal block and connect the cable(s) according the
schematic in
Image 5 – 12 .
Installation procedures