Barco F80-Q12, User Manual

Page: 42 / 210

R5906852 /09 F80 42
SYNC
SEL
SYNC
SEL
ERR IR ACT
SYNC I O
2
1
DP HDMI USB
2
1
LAN TRIGGER
OUT2 OUT1
WIRED REMOTE
(1A)
12V DC
1
Image 3–10 RCU hardwired connection
Note: Plugging the remote control will switch the broadcast address of the remote control to the
default value '0'. This is the only broadcast address that will work when hardwired. If you want to
change the broadcast address after disconnecting the remote control, see
“Projector Address”,
page 31 .
Pointing directly to the IR sensor
When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft
in a straight line). The remote control unit will not function properly if strong light strikes the sensor window or if
there are obstacles between the remote control unit and the projector IR sensor.
45° 45° 45° 45°
Image 3–11
3.10 Pulse RCU, silicone protection sleeve
(optional)
Introduction
Barco offers a silicone form fitting protection sleeve for the Pulse RCU. The silicone material keeps it
comfortably, non slip and soft touch. All buttons and holes remain accessible. The sleeve is quick and easy
installed. For ordering information see Barco website.
How to install
1. Pull off the rubber XLR-lid from the RCU.
Remote Control Unit