Barco F80-Q12 User Manual Download Page 124

Page: 124 / 210

R5906852 /09

F80

124

Image 10–6 Example of the Remote control menu

To disable an IR sensor, select the slider and drag to the left.

A blue slider means an active IR sensor.

A gray slider means an inactive IR sensor.

Select

APPLY

and click

to apply the changes.

10.2 Host name - custom projector name setup

What can be done?

The default host name of the projector is the projector type along with the serial number of your projector (e.g.
“UDX-4K40-0123456789”).

You can change this name to make it easier to spot in a network with multiple devices or projectors

How to set a different Host name

In the main menu, select

Settings

→

Communication

→

Host name

Image 10–7 Communication menu, Host name

The Host name menu is displayed.

GUI – System Settings

Summary of Contents for F80-Q12



















































































































































































































Search results

Summary of Contents for F80-Q12

Reviews:

Brands by name

Popular brands

Barco F80-Q12, User Manual

Search results

Summary of Contents for F80-Q12

Reviews:

Brands by name

Popular brands