Barco F400, User Manual

Page: 144 / 220

R5915525 /00 Fx400 Series 144
10.5 Lens features
About
In order to prevent unintentional lens adjustments, especially after e. g. a completed setup and adjustment,
there is a possibility to disable certain lens adjustment functions. These functions are directly accessible via
the remote control, and can by that easily be adjusted by accident.
Enter the menu shown below, and disable the desired functions by toggling the desired buttons. The menu
below shows all lens options in enabled position.
Image 10–38
10.6 Factory reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Factory settings
The following settings are the default factory settings:
All Factory settings are listed, regardless of the projector type or chosen projector options. If an
option in this list is not present in your menu, the feature is not available or enabled on your
projector.
Option / Domain Setting Factory setting
DMX DMX Mode Basic
Start Channel 1
Auto power down
Art-net
XLR Connector Disabled
GSM PIN State Unconfirmed
Illumination Power 100%
Constant light output (CLO) Disabled
ImageActuator 4K Actuator enabled / disabled
Enabled
Blend Blend / Mask size
Black Level
Disabled, all value to zero
GUI – System Settings