Barco F400, User Manual

Page: 115 / 220

115 R5915525 /00 Fx400 Series
8.8.3 Connection possibilities
At this moment, the only inputs supporting 3D on the Pulse input boards are the DisplayPort inputs
and HDMI input. More inputs may support 3D in a future release.
For the F400 series projectors, see document TDE11965 “Connector and source configuration”.
Connecting with the quad combo input card
There is only one way of projecting Active stereoscopic 3D with the Combo input card, using the following
setup:
• Source : Active Stereo (sequential L/R)
• Layout mode : Standard layout (1x1 layout)
• Video Timing : 2560 x 1600 (WQXGA) @120 Hz
• Color depth : 30 bpp
• Connector : DisplayPort 1.2 or HDMI
Connecting with the quad DP 1.2 Input card
You can use one of the following methods. The resulting image will always be an Active Stereo image.
Source
Layout mode
Video Timing /
cable
Fixed configuration? Color depth
Active Stereo
(sequential L/R) Standard layout
(1x1 layout) 2560 x 1600 @120
Hz 30 bpp
Active Stereo
(sequential L/R) 4 Column mode
(4x1 layout) 960 x 2160 @120
Hz 30 bpp
Active Stereo
(sequential L/R) 4 Quadrant mode
(2x2 layout) 1920 x 1080 @120
Hz 30 bpp
Passive Stereo
(separate L/R) Standard layout
(1x1 layout) 3840 x 2160 @60
Hz
• Cable 1: left eye
• Cable 2: right eye
30 bpp
Passive Stereo
(dual pipe L/R) 2 Column mode
(2x1 layout) 1920 x 2160 @60
Hz
• Cable 1: left eye, left
column
• Cable 2: left eye, right
column
• Cable 3: right eye, left
column
• Cable 4: right eye, right
column
30 bpp
8.8.4 3D Setup
Why change the 3D setup?
While Barco can provide a 3D emitter and active shutter glasses as options to this projector, you are also free
to use a 3D emitter and active shutter glasses of your own choice. Since glasses and emitter can have various
specifications compared to the ones Barco can provide, the 3D setup menu allows you to configure the output
image to the specifications of your glasses and emitter. The following can be configured:
• Swap Eyes : You can choose to invert the stereo Sync output signal ( depending on the chosen 3D emitter
and glasses).
• Swap frame pair : This setting allows you to correct the frame doubling sequence. If the frame rate of the
projected moving 3D content doesn’t look smooth, this option may help improve this.
• Dark time : You can select how much dark time the projected image will have between frames. You can
choose one of the options between 1000 µs and 2500 µs.
• Output mode : Choose the desired output mode. For more details, see further.
GUI – Installation