Barco F400, User Manual

Page: 132 / 220

R5915525 /00 Fx400 Series 132
Security when using a network
If unprotected, your network can be accessible from anywhere by anyone within the operating range of the
(wireless) network, if the security settings of the (wireless) network are insufficient. If people with malicious
intent access your network, sensitive information may leak to outsiders, or the projector itself may be
tampered with.
On network side, Barco thus recommends the maximum amount of security for your network, in order to avoid
this form of tampering. Some network devices may not be properly set for security when installed out of the
box. Make sure to read the provided user documentation of the network device to properly set up the
necessary security settings of the (wireless) network.
On projector side, Barco recommends you to make a limited amount of specific users on the external tools
Barco provides (e.g. Projector Toolset), and change all default passwords provided to strong passwords. For
more information on user creation and password changing, please consult the user guide of the external tools
(e.g. Projector Toolset).
A strong password has a minimum of 8 characters and should be unique. The password should be a
a mix of upper case letters, lower case letters, numbers and special characters.
10.1.3.2 Wired IP address set up
How to automatically set up the IP address
1. In the main menu, select Settings → Communication → LAN .
Image 10–9 Communication menu, LAN
The LAN menu is displayed.
Image 10–10 Example of the LAN menu
2. To enable Automatic, make sure the Automatic slider is set to the right. The color of the slider will be blue.
An IP address will be automatically assigned if it can make a connection to the network..
When connected, it is indicated with the connection symbol and the indication Connected .
3. Select APPLY and confirm.
How to manually set up the IP address
1. In the main menu, select Settings → Communication → LAN .
GUI – System Settings