Barco F400, User Manual

Page: 60 / 220

R5915525 /00 Fx400 Series 60
See also “Night vision”, page 78 for night vision settings.
Configure overrides
1. Within Connector settings, select the connector for which overrides must be configured.
2. Click on CONFIGURE .to start the Configure overrides menu.
Image 6–9
3. Set the override values for contrast, brightness, saturation and gamma. The gamma type can be set by
selecting one of the predefined settings. The current detected gamma type is indicated next to
Detected
gamma .
6.4 No source image
What happens when no valid signal is selected
If no source with valid signal is selected, by default a black image will be projected instead.
From Pulse 2.3.8 onward, you can customize the projected image when no source is selected. You can select
one of the predefined backgrounds (full Black or full Blue), or upload a custom image using an external tool
like Projector Toolset (e.g. project a company logo instead).
From Pulse 2.3.x onward, while no source with an active signal is selected and the OSD is not
projected on screen, the light source power will be reduced to 50% after 10 seconds as a light
source power saving feature. This power saving feature can be disabled in the Auto dim menu. For
more info, see
How to change
1. Press Menu to activate the menus and select Source .
Image 6–10 Main menu, Source
2. Press OK .
The Select Source menu is displayed with the actual available sources filled out.
GUI – Source