Barco F400, User Manual

Page: 29 / 220

29 R5915525 /00 Fx400 Series
2. Connect the other end of the cable with the mini-jack input of the projector.
2
Image 2–7
2.8 Pulse RCU, function of the on/off button
Function of the remote control on/off button
The Pulse remote control unit has at the front side an on/off switch (reference 1 Image 2–8 ). Switching off the
remote control prevents that unwanted commands are send due to an accidental key press. Furthermore,
switching the RCU off will extend the battery lifetime of the remote control.
To activate the remote control, press the on/off button. The button pressed indicator will light up.
To deactivate the remote control, press the on/off button again.
For Remote Control Units produced from April 2023 onward, press the on/off button until the button
pressed indicator will turn off (3-5 seconds).
Remote Control Units produced before this moment only require a short press of the on/off button.
Default after (re)placing batteries, is “ON”.
1
Image 2–8
2.9 Using the RCU
Pointing to the reflective screen
1. Point the front of the RCU to the reflective screen surface.
Remote Control Unit