Barco BarcoReality SIM 6 Ultra II, Owner'S Manual

Page: 28 / 223

3. Connections
4. Push the cursor key ↑ or ↓ to to highlight
Input Slots
.
INSTALLATION
INPUT SLOTS
NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]
800 PERIPHERAL
MORE ...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 3-10
5. Press
ENTER
to select.
The projector will scan the inputs and will display the results in the
Input Slots
menu.
INPUT SLOTS
SLOT SELECTOR [AUTOMATIC]
x 1. RGB [HS&VS]
- 2. RGB [HS&VS]
- 3. NO MODULE
- 4. NO MODULE
- 5. NO MODULE
- 6. NO MODULE
Select with
↑
or
↓
<ENTER> to toggle
<EXIT> to return
Menu 3-11
6. Push the cursor key ↑ or ↓ to select the first slot.
INPUT SLOTS
SLOT SELECTOR [AUTOMATIC]
x 1. RGB [HS&VS]
- 2. RGB [HS&VS]
- 3. NO MODULE
- 4. NO MODULE
- 5. NO MODULE
- 6. NO MODULE
Select with
↑
or
↓
<ENTER> to toggle
<EXIT> to return
Menu 3-12
7. Press
ENTER
to toggle the signal priority.
8. Press
EXIT
several times to leave the adjustment mode.
Possible indications on the input slot menu.
• RGB [HS&VS] = RGB analog signals, separate sync is horizontal and vertical sync
• RGB CS = RGB analog signals, separate sync is composite sync
• RGB CV = RGB analog signals, separate sync is composite video or tri-level sync
• RGB-SOG = RGB analog signals, sync on green is composite sync
• VIDEO
1
• S-VIDEO
1
When using an RCVDS 05 with a 5–Cable Output Module, connect these 5 cables to this 5-Cable Input Slot
(Input Slot 1) of the projector. All sources of the RCVDS can now be accepted by the projector.
3.6.5 Input 2
How to connect a Computer to the Projector?
1. Connect the output of the graphical card of the computer to the Computer input of the projector
Note: Only if the connection is < 60 cm. Otherwise insert an interface between the output of the computer and the input of the
projector.
24 R5976707 REALITY SIM 6 ULTRA II 01/02/2005