Barco BarcoReality SIM 6 Ultra II, Owner'S Manual

Page: 190 / 223

7. Service Mode
7.6 Change the address
What can be changed?
Within the Change password address item, the following items can be changed:
•
projector address
• common address
7.6.1 Start up
How to change the address ?
1. Push the cursor key ↑ or ↓ to highlight
Change Proj. Address.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ.ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
I2C DIAGNOSIS
DIMMING
MORE...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-11
2. Press
ENTER
to select.
The Change Projector Address menu will be displayed.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with
↑
or
↓
then <ENTER>
Reprogram with
↑
,
↓
,
←
,
→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-12
7.6.2 Projector Address
How to change the Projector Address?
1. Push the cursor key ↑ or ↓ to highlight
Projector Address
.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with
↑
or
↓
then <ENTER>
Reprogram with
↑
,
↓
,
←
,
→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-13
2. Press
ENTER
to select.
The actual address is filled in.
The first digit is highlighted.
How to enter the new projector address?
1. Enter the digits with the digit keys on the RCU or local keypad.
Or,
push the cursor keys
← or → to select a digit and change the value by pushing the cursor key ↑ or ↓ until the new value is reached.
186 R5976707 REALITY SIM 6 ULTRA II 01/02/2005