Software
The software to be used for the parameterization and diagnostics is
EYEPLUS.
Instructions:
• Connect the PC to one of the electronic modules using the interface
cable.
• Access the software through the relative icon.
• If EYEPLUS software installation is successful, starting
the application from Windows “Programs” Menu, or
using short-cut on desktop (Fig.1), you can access
main menu.
•
On left side, there are some notes about software
release, operating mode and serial communication
settings.
Below lift-truck picture ( picture, normally
present in main menu, doesn’t appear in fig.2).
There are actual active alarms (code level and description); in case of
more alarms with the same priority level, the first occurred is visualized.