Standard version
There are following data about accelerator
parameters: description, actual value, measure
unit,
default values, minimum and maximum
settable values.
Pressing
SAVE
button, selected parameter
VALUE
data field is updated with pedal sensor
actual voltage; if this value is out of permitted
range, you cannot calibrate it. In such a case
check for any lift truck fault.
You can execute following operations:
Load default value:
Press
DEFAULT
button;
VALUE
data field will be automatically updated with default
Value.
Change parameters value:
Discard changes:
Press
CANCEL
button; initial value will be restored in
VALUE
data fields.
If selected parameter value is out of permitted voltage range, you cannot calibrate it; in such a
case check for any lift truck fault.
In this window front panel there are 3 green led, expressing actual state of forward, reverse
and start switches.