Failure to observe the safety
provisions can cause serious
harm to technical staff and to
the truck
.
During maintenance and repair
procedures, scrupulously follow
the prescriptions indicated below
and the instructions given in this
manual. Maintenance operations
must be performed by qualified
technical personnel authorized by
the manufacturer. Always work
within the limits of safety,
according to the standards in
force.
ENVIRONMENT
NOTE
Carefully follow the safety
regulations pursuant to the
provisions in force when handling
working materials.
NOTE
Important information regarding
knowledge of the truck and its
safe use along with basic
information on truck maintenance
are given in the
Instruction and
maintenance manual.
Do not carry out any cleaning,
lubricating or maintenance
activities when the battery is
connected.
If maintenance operations are
carried out with the battery
connected, the machine may
accidentally be started, or sparks
may cause harm to the technical
staff
or to the machine itself. The
battery must therefore be kept
disconnected, unless expressly
prescribed by the maintenance or
repair instructions.
• All service actions must be
carried out with maximum
care and attention.
• Do not wear rings, wrist
watches, jewellery,
unfastened or hanging
garments such as ties, torn
clothing, scarves, unbuttoned
jackets or blouses, or open
zips, which could be caught in
the moving parts.
• Operate in separate work
areas specifically intended for
maintenance or specially
marked off to indicate work in
progress.
• During maintenance
operations, engage the parking
brake, turn off the truck and
remove the keys from the
dashboard, unless expressly
required by the operation
being carry out.
• Ensure that the machine
cannot be moved accidentally.
• The brakes are not activated
when they are manually
released for maintenance or
repair operations: in this case
provide for control of the
machine using suitable chocks
or similar.
• Ensure that no one is within
range of any movement of the
machine or equipment.
• Do not carry out any
maintenance or repair on the
machine with a person sitting
in the seat, unless the person
is qualified and necessary for
execution of the operation.
• Do not switch on the machine
or activate its equipment from
any position other than sitting
in the driver’s seat.