User can’t enter main menu until a
selection is made pressing Confirm
button.
Notice
: Remember that flash memory is
blank: no information about model is
present on main board, and you can’t
verify if your selection is correct (all
single and twin drive motor
systems available are listed in selection list box of Fig. 48).
In such a case a human error is possible, so take care you are doing the correct selection.
In fact, after selecting truck model and entering main menu, you could load wrong file
into control board ( i.e. if you’ve selected a twin motor system while your lift truck is a
single drive motor system).
PROGRAMMING PHASE
Once selected truck model (model0, for example), EYEPLUS software points proper files in
C:\Source_SME\Source_TRZ_FILE\model0 directory and flash programming phase can start
(Fig,50).
User can read source directory and filename in Flash menu front panel, to be sure he selected
the proper model \ source file.