E/S/H PARAMETERS AND L1, L2 ,L3 LIMITS CALIBRATION
In that menu front panel, you can find following
data about
ESH parameters
: description, actual
value, new value you want to set, measure unit,
default values for E, S, and H operating mode,
settable per cent values for parameters in L1, L2, L3
operating mode.
You can execute following operations:
Select default value:
1.
Press
DEFAULT
button ;
NEW
data field will be automatically updated with default
value
2.
Press
SAVE
button and confirm;
OLD
data field too will be updated
Change actual value:
1.
Insert changed value in
NEW
data field
2.
Press
SAVE
button and confirm; in case of good result,
OLD
data field is updated.
Otherwise an error is signaled and
NEW
data field initial value is restored.
Discard changes:
1.
Press
CANCEL
button;
NEW
data fields will be restored with initial values
2.
Press
SAVE
button and confirm;
OLD
data fields too are restored with initial values
With
E_S_H
pop-up menu present in this window, you can select one of lift truck possible
energetic operating modes (Economic, Standard and High); selected operating mode default
values are so loaded on characteristic parameters.
The ESH parameters calibration procedure is optional, and you can enable/disable it with the
ESH button.
In any case, you can disable limits calibration section (
L1
,
L2
and
L3
parameters) with
PROGRAMMABLE WORKING
button.
