LIFT CALIBRATION
There are following data about lift
parameters: description, actual value,
measure unit, default values, minimum
and maximum settable values. Pressing
SAVE button, selected parameter
VALUE data field is updated with lift
sensor actual voltage; if this value is
out of permitted range, you cannot
calibrate it. In such a case check for
any lift truck fault.
You can execute following operations:
Load default value:
Press
DEFAULT
button;
VALUE
data fields will be automatically updated with default
values
Change parameters value:
Discard changes:
Press
CANCEL
button;
VALUE
data fields will be restored with initial values.