STEERING SENSOR CALIBRATION
There are following data about steering
parameters: description, actual value, measure
unit, default values, minimum and maximum
settable values. Pressing
SAVE
button, selected
parameter
VALUE
data field is updated with
steering sensor actual voltage; if this value is
out of permitted range, you cannot calibrate it. In such a case check for any lift truck fault.
You can execute following operations:
Load default value:
Press
DEFAULT
button;
VALUE
data fields will be automatically updated with default
values.
Change parameters value:
Discard changes:
Press
CANCEL
button; initial value will be restored in
VALUE
data fields
ACCELERATOR PEDAL CALIBRATION
