STEERING PARAMETERS CALIBRATION
In that menu front panel, you can
find following data about steering
parameters: description, actual
value, new value you want to set,
measure unit, default values
minimum and maximum settable
values.
You can execute following
operations:
Select default value:
1. Press DEFAULT button ; NEW
data fields will be automatically
updated with default value.
2. Press SAVE button and confirm; OLD data fields too will be updated.
Change actual value:
1. Insert changed value in NEW data field
2. Press SAVE button and confirm; in case of good result, OLD data field is updated.
Otherwise an error is signaled and NEW data field initial value is restored.
Discard changes:
1. Press CANCEL button; NEW data fields will be restored with initial values.
2. Press SAVE button and confirm; OLD data fields too are restored with initial values.
