OVERVIEW
As explained before (refer to chapter 3), when user programs flash memory, EYEPLUS
software loads proper files pointing a directory named as lift truck model itself, thanks to the
presence of
“Truckmodel.ini
” configuration file in EYEPLUS installation directory.
Truckmodel.ini
file lists all available truck models with their main characteristics (obviously
this file has to be upgraded if new lift truck models are introduced).
To make an example, these are some lines of
Truckmodel.ini
configuration file:
0 C:\Source_SME\Source_TRZ_FILE\model0 model0 lift truck
1C:\Source_SME\Source_TRZ_FILE\model1 model1 lift truck
2 C:\Source_SME\Source_ONE_FILE\model1 model2 lift truck
……………………………………………………………………
6 C:\Source_SME\Source_DRV_FILE\model3 model3 lift truck
……………………………………………………………………
9 C:\Source_SME\Source_SNG_FILE\model4 model4 lift truck
Number
= identifies lift truck model; the number corresponds to numeric code
present in source filename xx-xx-xx xxXX.xxx0 (this value is read also from panel
memory and used to customize automatically EYEPLUS menus)
Directory
= each model has its own linked directory which contains source files
Motor system
= this code defines if your truck is a single or twin motor system and
corresponds to source filename xx-xx-xx xxxx.XXX0 code (TRZ or DRV for twin
motor systems, ONE or SNG for single motor systems)
Lift Truck model
= this is the name operator reads from list box when he has to
select the lift truck model (see after).
SOURCE FILES AUTOMATIC UPGRADE PROCEDURE
Moreover, SME company has developed an
utility
whose purpose is to automatically install
or upgrade source files to correct destination path.