CRITICAL HEIGHT: SPEED LIMITS CALIBRATION
You can set maximum speed
of pump and drive motors in
case of a fork height superior
to critical one (that condition
is signalled by two switches
present on lift truck forks)
In that menu front panel, you
can find following data about
critical maximum speeds:
description, actual value, new
value you want to set,
measure unit, default values
minimum and maximum
settable values, actual value in percent.
You can execute following operations:
Select default value:
1. Press DEFAULT button ; NEW data fields will be automatically updated with default
value
2. Press SAVE button and confirm; OLD data fields will be updated
Change actual value:
1. Insert changed value in NEW data field
2. Press SAVE button and confirm; in case of good result, OLD data field is updated.
Otherwise an error is signaled and NEW data field initial value is restored.
Discard changes:
1. Press CANCEL button; NEW data fields will be restored with initial values
2. Press SAVE button and confirm; OLD data fields are restored with initial values
3.
